Of Course everyone wants to paint a Razorback Face on Canvas . So I am going to show you step by step, today, how to paint this popular image on canvas.
First let us start with the supply list . This is going to be easy.
1. two big bottles of apple barrel acrylic craft paint
one black and one white
2. one tube of acrylic brilliant red paint.
3. One 1 inch flat brush or 1/2 inch flat brush.
4. One small fine point brush usually called a rigger
5. one 11 X 14 wrapped canvas
you can use up to a 16 X 20 but you lose the effect
if you go bigger.
6. Some styrofoam plates to mix paint
7. A small pan for water or small styrofoam cup
8. A old dish rag or a roll of paper towels.
Here is an image of all your supplies
Now the first step to painting the razorback is to
squeeze some acrylic red on your styrofoam plate
and use your 1 inch brush to cover the front and
sides of you wrapped canvas.
After you cover the whole canvas and sides
with red.
Place some black on your plate and
paint a black oval shapes nose in the middle
at the bottom of the canvas.
You can use your one inch flat brush or a half
inch flat brush.
Please allow about 5 minutes to let the red set,
and dry a little.
The next step is to mix a little of red with a little
black on your plate.
Then place some vertical lines
in a V shape at the top in the middle of the canvas.
About two inches wide .
Please look at image.
Next you will draw with your flat brush, mixed
with red and black, a line on the right side of the
V shaped brow in the middle of the canvas.
You will continue coming down the V brow
making a curl , come up , then curl down a little.
Continue to draw a horizontal line to the outside
of the canvas on the right side.
Do this on both sides.
Next make a curved line under each curved
line for the eyes.
Then make a curve line underneath each eye.
Or above the nose on the right and left.
View the image:Breath, this was the hardest part
Place more lines above the nose with your
flat brush mixed with black and red.
Then draw the tusk with your flat brush
mixed with red and black as shown.
You will brush a small mixture of red
and black in the section above the eye.
Also, make lines on the side of the face.
Three or four thin curved lines as shown.
Also take your rigger brush or thin brush and
follow the line under the brow and above the
u line for the eye.
Do this on both sides.
Paint inside this section all black.
Clean your rigger brush and mix a small
amount of red with white.
You will then paint a little of this color
between the eyes to create depth and contrast.
You will also use this mixture with water and
make some whitish red lines on the black lines
of his brow area.See images:
We will next paint the nose.
Use your rigger brush and mix some
white with black making a grayish color.
With your brush draw two circles where
you want your nostril wholes.
Next paint the rest of the nose this
color of gray.
You will now need to go back to white with your
rigger brush.
Outline you nose and nostril holes with a then
line of white paint by barely toughing the canvas.
Paint all tusk with you pure white.
Also paint a mix of white and red watery lines
above the nose. Paint this mixture on the lines
above the nose as shown.
WE are all most done.
Paint the eyes a pure white.
Next paint a black space for the pupil.
Then paint a red line around the bottom
of the black pupil.
WOOO !!!!!!!!! PIG SOOOOOOIE!!!!!!
YOU ARE DONE!!!!!!!
I know you did a good job.
Hope you had a good time
painting your razorback.
Please Join my email list for more
free painting lessons.
And visit my art gallery website at:
belinda-lawson.artistwebsites.com
All so I sell on ebay: stores.ebay.com.countyartloft
First let us start with the supply list . This is going to be easy.
1. two big bottles of apple barrel acrylic craft paint
one black and one white
2. one tube of acrylic brilliant red paint.
3. One 1 inch flat brush or 1/2 inch flat brush.
4. One small fine point brush usually called a rigger
5. one 11 X 14 wrapped canvas
you can use up to a 16 X 20 but you lose the effect
if you go bigger.
6. Some styrofoam plates to mix paint
7. A small pan for water or small styrofoam cup
8. A old dish rag or a roll of paper towels.
Here is an image of all your supplies
Now the first step to painting the razorback is to
squeeze some acrylic red on your styrofoam plate
and use your 1 inch brush to cover the front and
sides of you wrapped canvas.
After you cover the whole canvas and sides
with red.
Place some black on your plate and
paint a black oval shapes nose in the middle
at the bottom of the canvas.
You can use your one inch flat brush or a half
inch flat brush.
Please allow about 5 minutes to let the red set,
and dry a little.
The next step is to mix a little of red with a little
black on your plate.
Then place some vertical lines
in a V shape at the top in the middle of the canvas.
About two inches wide .
Please look at image.
Next you will draw with your flat brush, mixed
with red and black, a line on the right side of the
V shaped brow in the middle of the canvas.
You will continue coming down the V brow
making a curl , come up , then curl down a little.
Continue to draw a horizontal line to the outside
of the canvas on the right side.
Do this on both sides.
Next make a curved line under each curved
line for the eyes.
Then make a curve line underneath each eye.
Or above the nose on the right and left.
View the image:Breath, this was the hardest part
Place more lines above the nose with your
flat brush mixed with black and red.
Then draw the tusk with your flat brush
mixed with red and black as shown.
You will brush a small mixture of red
and black in the section above the eye.
Also, make lines on the side of the face.
Three or four thin curved lines as shown.
Also take your rigger brush or thin brush and
follow the line under the brow and above the
u line for the eye.
Do this on both sides.
Paint inside this section all black.
Clean your rigger brush and mix a small
amount of red with white.
You will then paint a little of this color
between the eyes to create depth and contrast.
You will also use this mixture with water and
make some whitish red lines on the black lines
of his brow area.See images:
We will next paint the nose.
Use your rigger brush and mix some
white with black making a grayish color.
With your brush draw two circles where
you want your nostril wholes.
Next paint the rest of the nose this
color of gray.
You will now need to go back to white with your
rigger brush.
Outline you nose and nostril holes with a then
line of white paint by barely toughing the canvas.
Paint all tusk with you pure white.
Also paint a mix of white and red watery lines
above the nose. Paint this mixture on the lines
above the nose as shown.
WE are all most done.
Paint the eyes a pure white.
Next paint a black space for the pupil.
Then paint a red line around the bottom
of the black pupil.
WOOO !!!!!!!!! PIG SOOOOOOIE!!!!!!
YOU ARE DONE!!!!!!!
I know you did a good job.
Hope you had a good time
painting your razorback.
Please Join my email list for more
free painting lessons.
And visit my art gallery website at:
belinda-lawson.artistwebsites.com
All so I sell on ebay: stores.ebay.com.countyartloft
No comments:
Post a Comment